Download Article

Download Article

Whether your pool looks similar a swamp, or y'all just desire a fresh, make clean-looking appearance, acid-washing your pond puddle can help. Too called "drain and clean," pools need this blazon of cleaning when winterizing the puddle isn't done correctly, or algae has taken over due to the pool not being used or maintained in a while. The acrid-wash procedure substantially strips the top layer of plaster to reveal fresh plaster below, and then information technology's not recommended to practice it ofttimes. But once in a while is a great idea!

Steps

  1. ane

    Bleed your puddle completely. As you drain, make certain to clean upwards any debris equally you become. If your pool has an autofill, you should make sure that you turn it off during the bleed. Once your pool is completely empty, get-go the acid-wash process.[1]

  2. 2

    Change into protective gear that includes clothing, goggles, mask, gloves and boots. [2]

    Advertisement

  3. 3

    Mix 1 gallon (3.8 liters) of acid with one gallon (3.8 liters) of water in a watering tin can. Acid must exist added to the water and not the other style around.[3]

  4. 4

    Wet down ane of the walls with the hose. The hose should non have a nozzle and water should be running from the hose at all times.[4]

  5. five

    Pour the acid mixture on the wall from tiptop to bottom in 10-foot (300 cm) sections at a time, leaving the acid on the plaster for about 30 seconds. During this time, you lot should be scrubbing the wall with a castor.

  6. six

    Rinse the section you simply acid-washed quickly and thoroughly. [v] Earlier moving to the adjacent section, make sure you rinse the wall well so the acrid doesn't go along to eat the plaster.

  7. seven

    Neutralize the pool after the acid-launder is consummate. The acrid-washing procedure leaves a foamy puddle of residue on the bottom of the puddle that must be removed before it damages the plaster.

    • Apply soda ash to the acid pool, scrubbing the mixture with a pool brush. Y'all will need to employ 2 lb. (.ix kg) of soda ash per 1 gallon (3.8 liters) of acid.
    • Pump the mixture into a basin using a submersible pump.
    • Dispose of what yous pumped, every bit the acid tin can kill frogs, fish and plants. Rinse out the bowl.
    • Cascade water over any remaining residue, rinsing carefully around the bleed.

    8. Advertising

Add New Question

  • Question

    I poured acid before disposing the water in the pool. What must I do now?

    Uthra Balakrishna

    Uthra Balakrishna

    Customs Respond

    Quickly drain information technology off. The acid will exist stuck on the walls. Clean information technology and pour the water.

  • Question

    For how long I should await to enter the pool afterwards I put acid?

    Community Answer

    Depending on how much acid you added and if your filter is moving the h2o speedily about a hour, cheque with your exam kit (phenol red), it will let you know the acid level. I add a bit less than calculated and and then adjust further in small-scale doses, that saves coin. Annotation: y'all should retest side by side 24-hour interval as some cement/physical pools react with acrid causing a pocket-sized pH bounciness.

  • Question

    How tin you tell if the acid is working?

    Community Answer

    If the dirt disappears, information technology's working.

See more answers

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

Video

  • If acid gets into the eyes or rima oris, flush the surface area with the hose (no nozzle) for 15 minutes. If contact is made with the skin, rinse for 30 seconds as soon as contact is fabricated.

  • If you do non meet results after the first attempt, you lot might need to increase the acid/water ratio, scrub harder or increment the time the acid is on the wall. You may have to repeat the procedure a couple of times to get the walls clean.

  • Professionals will add a cleaning condiment, like Bio-Dex White & Bright or Aquapoxy Etching Cleaner. This volition thicken the acid mix making it adhere better to the walls of the pool. It will also neutralize the smell of the muriatic acid and reduce etching crusade by muriatic acid.

Thanks for submitting a tip for review!

Advertisement

  • Piece of work carefully around the acid. Wearable protective clothing, send the acid safely by securing it in the vehicle, rinse off after y'all've finished acid-washing the puddle, and have at least one other person working with you.

  • If the acrid is non rinsed completely, it will continue to etch the plaster. Be careful non to permit the acid to run from the shallow end to the deep cease every bit it volition create an etched path on the pool floor.

  • The acrid-washing technique should never be used on a vinyl-lined pool. Detergents and conditioners work best for this type of pool.

Advertizing

Things You'll Demand

  • Garden hose with no nozzle
  • Protective clothing
  • Gloves
  • Mask
  • Goggles
  • Old boots
  • Acrid
  • Watering can
  • Pool brush
  • Soda ash
  • Submersible pump
  • Bowl

References

Well-nigh This Commodity

Thanks to all authors for creating a page that has been read 183,401 times.

Reader Success Stories

  • Jackie Thomas

    Jackie Thomas

    May 31, 2017

    "Watching her acid wash the pool showed me how easy it tin can be. I liked the extra tips for things to watch out for...." more

Did this article help you?